Skip to content
  • There are no suggestions because the search field is empty.

How to start a new XPJ-1341SR-P with MS51 inks

The document describes all necessary steps to load MS51 inks into a new XpertJet1341SR-Pro printer.
Please follow the procedure below in order to correctly install our MS51 inks. 

 

Required items:

  1. Firmware V1.06 and MSA 5.1.2.0 (or higher)
  2. High capacity ink pack adaptors: 1x VJ-HCIPADPT (1 contains 4 adaptors)
  3. Cleaning & Ink:
  • MS31 220 ml cleaning cartridges for the initial cleaning cycle

    XPJ-1341SR-P
    Part N° #
    VJ-MS31-CL220E 4

 

  • MS51 ink for XPJ-1341SR-P

    XPJ-1341SR-P
    Part N° #
    MS51-BK1000E 1
    MS51-CY1000E 1
    MS51-MA1000E 1
    MS51-YE1000E 1

 

  • Cleaning fluid to carry out the daily maintenance: VJ-ULVA1-ML500

     

Important

Please make sure to order the High capacity ink pack adaptors, MS51 ink packs and Maintenance cleaning fluid separately!

The Start-up cleaning liquid is shipped with every new printer.

 

 

Procedure:

  • First of all load the FW 1.06 (or higher) on the printer in order for the printer to accept the MS51 smart cards. 

WARNING:


If you do not use the mentioned FW-version (or higher) the boot up cycle of the printer with MS51 ink will fail !!

 

  • Boot the printer in “User Mode” and enter the initial settings (language, IP address…).
  • Activate the printer.
  • Reboot the printer.
  • Perform the “initial cleaning – initial ink charge”: 

           (please consult the Start-up guide for detailed instructions on how to correctly load the cleaning/ink):
 

                             1ow32gSBfLnrMP-gU06Zjzsbqm-GL1v-1g

                             SYTWXkVplywF9C0URZnHS7gxv6JRYxWTWg 

  • Unpack and insert the MS31 220ml Cleaning cartridges
  • After the cleaning cycle the display will show: "Wash Retry?" -> Choose No

 

                            u4YdggCRyRl8X47cWzRAdu_HV2l86xUO1g

 

  • Insert the MS51 ink packs in the high capacity pack adaptors, install them in the printer and insert the smart cards.
  • The "Ink Charge" with the MS51 inks will be initiated.

 

                           QPpYQbqvd2xQmjRjWWQ7J5bZP-_h3gQuiw

 

  • Once the ink has been loaded, following message will appear (ink charging cycle is completed): "Media End".