Ink consumption Cleaning/Sleep mode: XPJ-661UF
TABLE OF CONTENTS
- Ink Maintenance for 4-color UH21
- Ink Maintenance for 6-color UH21
- Ink Maintenance for 4-color US11
- Ink Maintenance for 6-color US11
Ink Maintenance for 4-color UH21
Configuration
The illustration below shows the ink slot layout when looking from the rear of the printer.
Slot 1 is located closest to the operation panel and Slot 6 is located far from the panel.
| Slot 1 | Slot 2 | Slot 3 | N/A | N/A | Slot 4 | Slot 5 | Slot 6 |
| M | M | C | N/A | N/A | C | K | Y |
Cleaning mode
| Consumption in gram UH21 | Slot 1-4 | Slot 5 | Slot 6 |
|---|---|---|---|
| Short cleaning | 0.9 | 2.0 | 2.0 |
| Normal Cleaning | 1.2 | 2.5 | 2.5 |
| Long Cleaning | 2.5 | 4.8 | 4.8 |
| Little Charge | 4.2 | 8.7 | 8.7 |
Sleep mode
Sleep mode performs a "Little Charge" once a week.
After sleep mode depends on the time it was in sleep mode/Powered off and the "Ink Maintenance" setting:
When Ink Maintenance is set to “Normal” or "Light", the following maintenance is performed depending on the elapsed time of power-off or sleep mode (T)
| Elapsed Time (T) | Operation |
|---|---|
| T < 5 minutes | N/A |
| 5 minutes ≤ T < 1 hour | N/A |
| 1 hour ≤ T < 24 hours | N/A |
| 24 hours ≤ 72 hours | N/A |
| 72 hours ≤ T | N/A |
When Ink Maintenance is set to “Full”, the following maintenance is performed depending on the elapsed time of power-off or sleep mode (T)
| Elapsed Time (T) | Operation |
|---|---|
| T < 5 minutes | N/A |
| 5 minutes ≤ T < 1 hour | N/A |
| 1 hour ≤ T < 24 hours | N/A |
| 24 hours ≤ T < 72 hours | Little Charge (the total amount of ink used approx. 34.2 ml: K 8.7 ml, C 8.4 ml, M 8.4 ml, Y 8.7 ml). |
| 72 hours ≤ T | Little Charge + black ink spitting (the amount of ink used: approx. 43.0 ml; K 11.0ml, C 14.9ml, M 8.4ml, Y 8.7ml) |
Ink Maintenance for 6-color UH21
Configuration
The illustration below shows the ink slot layout when looking from the rear of the printer.
Slot 1 is located closest to the operation panel and Slot 6 is located far from the panel.
| Slot 1 | Slot 2 | Slot 3 | N/A | N/A | Slot 4 | Slot 5 | Slot 6 |
| K | M | C | N/A | N/A | Y | Va | Wh |
Cleaning mode
| Consumption in gram UH21 | Slot 1-4 | Slot 5 |
Slot 6 |
|---|---|---|---|
| Short cleaning | 0.9 | 2.0 | 2.1 |
| Normal Cleaning | 1.2 | 2.5 | 2.5 |
| Long Cleaning | 2.5 | 4.8 | 4.9 |
| Little Charge | 4.2 | 8.7 | 8.8 |
Sleep mode
Sleep mode performs a "Little Charge" once a week.
After sleep mode depends on the time it was in sleep mode/Powered off and the "Ink Maintenance" setting:
When Ink Maintenance is set to “Normal” or "Light", the following maintenance is performed depending on the elapsed time of power-off or sleep mode (T)
| Elapsed Time (T) | Operation |
|---|---|
| T < 5 minutes | N/A |
| 5 minutes ≤ T < 1 hour | White ink spitting (the amount of ink used: approx. 1.2 ml) |
| 1 hour ≤ T < 24 hours | Short cleaning + Powerful white ink spitting (the total amount of ink used: approx. 12.6 ml; White 7.0 ml, Varnish 2.0 ml, CMYK 0.9 ml each) |
| 24 hours ≤ T | Little Charge + Very powerful white ink spitting (the total amount of ink used: approx. 42.8 ml; White 15.0 ml. Varnish 8.7 ml, K 6.5ml, CMY 4.4 ml each) |
When Ink Maintenance is set to “Full”, the following maintenance is performed depending on the elapsed time of power-off or sleep mode (T)
| Elapsed Time (T) | Operation |
|---|---|
| T < 5 minutes | N/A |
| 5 minutes ≤ T < 1 hour | White ink spitting (the amount of ink used: approx. 1.2 ml) |
| 1 hour ≤ T < 24 hours | Short cleaning + Powerful white ink spitting (the amount of ink used: approx. 12.6 ml; White 7.0 ml, Varnish 2.0 ml, CMYK 0.9 ml each) |
| 24 hours ≤ T < 72 hours | Little Charge + Very powerful white ink spitting (the amount of ink used: approx. 42.8 ml; White 15.0 ml, Varnish 8.7 ml, Black 6.5ml, CMY 4.4 ml each) |
| 72 hours ≤ T | US11- Yellow ink recovery sequence + Very powerful white ink spitting + Yellow ink spitting (the total amount of ink used: approx. 70.9 ml; White: 17.6 ml, Varnish 17.4 ml, Black 10.7 ml, CMY 6.6 ml each). |
Ink Maintenance for 4-color US11
Configuration
The illustration below shows the ink slot layout when looking from the rear of the printer.
Slot 1 is located closest to the operation panel and Slot 6 is located far from the panel.
| Slot 1 | Slot 2 | Slot 3 | N/A | N/A | Slot 4 | Slot 5 | Slot 6 |
| M | M | C | N/A | N/A | C | K | Y |
Cleaning mode
| Consumption in gram US11 | Slot 1-4 | Slot 5 | Slot 6 |
|---|---|---|---|
| Short cleaning | 1.1 | 2.4 | 2.4 |
| Normal Cleaning | 1.3 | 2.8 | 2.9 |
| Long Cleaning | 2.6 | 4.9 | 5.1 |
| Little Charge | 4.4 | 9.1 | 9.0 |
Sleep mode
Sleep mode performs a "Little Charge" once a week.
After sleep mode depends on the time it was in sleep mode/Powered off and the "Ink Maintenance" setting:
When Ink Maintenance is set to “Normal” or "Light", the following maintenance is performed depending on the elapsed time of power-off or sleep mode (T)
| Elapsed Time (T) | Operation |
|---|---|
| T < 5 minutes | N/A |
| 5 minutes ≤ T < 1 hour | N/A |
| 1 hour ≤ T < 24 hours | N/A |
| 24 hours ≤ T < 72 hours | N/A |
| 72 hours ≤ T | N/A |
When Ink Maintenance is set to “Full”, the following maintenance is performed depending on the elapsed time of power-off or sleep mode (T)
| Elapsed Time (T) | Operation |
|---|---|
| T < 5 minutes | N/A |
| 5 minutes ≤ T < 1 hour | N/A |
| 1 hour ≤ T < 24 hours | N/A |
| 24 hours ≤ T < 72 hours | N/A |
| 72 hours ≤ T | US11- Yellow ink recovery sequence (the total amount of ink used: 56.4 ml; Yellow 16.8 ml, CMK 13.2 ml each) |
Ink Maintenance for 6-color US11
Configuration
The illustration below shows the ink slot layout when looking from the rear of the printer.
Slot 1 is located closest to the operation panel and Slot 6 is located far from the panel.
| Slot 1 | Slot 2 | Slot 3 | N/A | N/A | Slot 4 | Slot 5 | Slot 6 |
| K | M | C | N/A | N/A | Y | Va | Wh |
Cleaning mode
| Consumption in gram US11 | Slot 1-4 |
Slot 5 | Slot 6 |
|---|---|---|---|
| Short cleaning | 1.1 | 2.4 | 2.4 |
| Normal Cleaning | 1.3 | 2.8 | 2.9 |
| Long Cleaning | 2.6 | 4.9 | 5.1 |
| Little Charge | 4.4 | 9.1 | 9.0 |
Sleep mode
Sleep mode performs a "Little Charge" once a week.
After sleep mode depends on the time it was in sleep mode/Powered off and the "Ink Maintenance" setting:
When Ink Maintenance is set to “Normal” or "Light", the following maintenance is performed depending on the elapsed time of power-off or sleep mode (T)
| Elapsed Time (T) | Operation |
|---|---|
| T < 5 minutes | N/A |
| 5 minutes ≤ T < 1 hour | White ink spitting (the amount of ink used: approx. 1.2 ml) |
| 1 hour ≤ T < 24 hours | Short cleaning + Powerful white ink spitting (the total amount of ink used approx. 12.6 ml: White 7.0 mm, Varnish 2.0 ml, CMYK 0.9 ml each). |
| 24 hours ≤ T | Little Charge + Very powerful white ink spitting (the total amount of ink used approx. 41.9 ml: White 15.2 ml, Varnish 9.1 ml, CMYK 4.4 ml each). |
When Ink Maintenance is set to “Full”, the following maintenance is performed depending on the elapsed time of power-off or sleep mode (T)
| Elapsed Time (T) | Operation |
|---|---|
| T < 5 minutes | N/A |
| 5 minutes ≤ T < 1 hour | White ink spitting (the amount of ink used: approx. 1.2 ml) |
| 1 hour ≤ T < 24 hours | Short cleaning + Powerful white ink spitting (the amount of ink used approx. 12.6 ml: White 7.0 ml, Varnish 2.0 ml, CMYK 0.9 ml each) |
| 24 hours ≤ T < 72 hours | Little Charge + Very powerful white ink spitting + Yellow ink spitting (the amount of ink used approx. 42.1 ml: White 15.2 ml, Varnish 9.1 ml, Yellow 4.6ml, CMK 4.4 ml each) |
| 72 hours ≤ T | Yellow ink recovery sequence + Very powerful white ink spitting + Yellow ink spitting (the total amount of ink used approx. 81.1 ml: White: 21.0 ml, Varnish 19.3 ml, Yellow 13.2 ml, CMK 9.2 ml each). |
Was this article helpful?